ARGUS/2202 Parallel Port Connection
Disconnect any printer cable connected to the parallel port adapter in the Host system and connect the ARGUS/2202 Reader to the Computer parallel port with the cable
supplied. Reconnect the printer cable to the ARGUS/2202 printer port. Power Connections
Power is provided by a wallmount 120VAC to 1317VDC transformer that connects to the ARGUS/2202 Reader via a coaxial POWER connector on the left side of the back panel. Plug and Play
The ARGUS/2202 may be connected, disconnected, powered on or powered off at any time and the cards installed will be reconnected to the application program. Printing
In order for the printer to function, the ARGUS/2202 must be powered up.
Software Drivers
Software drivers for the ARGUS/2202 are available from Litronic. These drivers may be obtained from our web sfte: hftp://www.Iftronic.com, or via FTP from: ftp.Iftronic.com. NOTE: Access to driver information at either of these facilities must be prearranged. This can be done by email request to: support@litronic.com.
Applications Software
ARGUS/2202 Readers are not supplied with application software. Use of the reader requires an application program that uses the PcCard in some manner. FCC NOTICE
This equipment generates and uses radio frequency energy and if
not installed and used properly, in strict compliance with the manufacturer's instructions, may cause interference to radio and television reception. The ARGUS/2202 has been tested and found to comply with the limits for Class A computing devices in accordance with the specifications in Part 15 of FCC rules, which are designed to provide reasonable protection against such interference in a business installation. However, there is no guarantee that interference will not occur in a
particular installation. You can determine if this device causes interference to radio or television reception, by monitoring reception when the ARGUS/2202 is installed and when it is removed from the computer. | 
