White Systems Horizontal
Carousel - Model WG7099
Each unit sold separately.

• Modular design

• L 70' x W 6' x H 16'

• Overall height 20 inches greater than bins

• Dual drive - AC 277V - 3 phase motors

• Double yoke suspension for large capacity

• 70 Bins W 24.5" x H 16' x D 18"

• Solid steel bin backs

• 600 pounds per bin

• Baked enamel wire sides

• Adjustable baked enamel wire shelves

• Foot switch with OSHA guard

• Serial Numbers: WG26754 and WG26755

Heavy top structure and suspension frame
distributes load, extending component life and
assuring smooth and quiet operation. Catwalks
or mezzanines can be mounted directly to the top
of carousels or supported between units. Double
ladder type support columns transmit loads to
channel base section. Unique bin design
distributes shelf loads through the two sides and
back of bin, forming a rigid box structure, then
through heavy duty top suspension frame to
wheels and track. Approximately seven degree
slope of shelves using 18 inch shelves (16 inch
deep bin) to counteract centrifugal force. Angle
varies with depth and shelf spacing. Shelf ratings:
75 lbs., 150 lbs., 200 lbs. Special higher ratings
on application. Shelves are easy to remove
and adjust on choice of centers. No bolts. Heavy
gauge steel wire: .283 inch diameter on vertical
wires; .177 on horizontal wires.  Low voltage

Click on a section to see the big picture.

DC control system. Motors and controls meet NEC
standards. Foot switch with OSHA guard standard. Many
electrical, electronic and computer control options available
including White systems software. Controls can be placed in any
location convenient to user requirements. Indirect recessed
drive located inside upper track requires minimum carousel height.